home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 22 / Cream of the Crop 22.iso / os2 / 1601_200.zip / README.OS2 < prev    next >
Text File  |  1996-07-24  |  15KB  |  384 lines

  1. README.OS2                   MATROX GRAPHICS INC.                   24-Jul-1996
  2.  
  3.               The MGA Millennium/Mystique OS/2 PM Display Driver
  4.                             Version 2.00.035
  5.  
  6. Product Description
  7. -------------------
  8.  
  9. The MGA Millennium/Mystique OS/2 PM driver supports 8-bit (256 colors), 16-bit
  10. (64K colors), and 24- and 32-bit (16M colors) display modes under OS/2 2.11 and
  11. 3.0 (Warp), in resolutions ranging from 640 x 480 to 1800 x 1440.
  12.  
  13.  
  14. Driver Installation
  15. -------------------
  16.  
  17. To install the software, follow the procedure below:
  18.  
  19.    1. If you have previously configured OS/2 for another graphics card, then
  20.       you should uninstall the drivers for that card.  Be sure that OS/2 will
  21.       start up in VGA mode before installing the MGA Millennium/Mystique
  22.       driver.
  23.  
  24.    2. If you downloaded the driver from the Matrox BBS, use the DOS LABEL
  25.       command to label your floppy as OS2.
  26.  
  27.    3. Using the Command Prompts folder of OS/2, open an OS/2 Window or Full
  28.       Screen session.
  29.  
  30.    4. Insert the driver disk in a floppy drive (if you are installing from
  31.       the floppy disk) or insert the CD-ROM in its drive bay.
  32.  
  33.    5. Make the CD-ROM or floppy disk the active drive and type:
  34.  
  35.       "SRCPATH\INSTALL",
  36.  
  37.       where SRCPATH is the path which contains the MGA PM drivers.
  38.  
  39.       Examples:
  40.  
  41.       A:\INSTALL     (if installing from a diskette with OS/2 only)
  42.       A:\OS2\INSTALL (if installing from diskette with OS/2 and NT)
  43.       D:\OS2\INSTALL (if installing from a CD-ROM)
  44.  
  45.       Note: if you install this driver to a Warp System, you may run
  46.  
  47.       \INSTALL /U
  48.  
  49.       and everything will be installed without any further input from the
  50.       user (primary, secondary selection, driver selection, and source
  51.       disk/path selection).
  52.  
  53.    6. You will see a dialog box in which you can select the Primary Display.
  54.       Choose "Matrox MGA Millennium/Mystique Series".  You may have to change
  55.       the source drive if you are not installing from drive A.
  56.  
  57.    7. The installation program will then proceed with the installation.  When
  58.       it is complete, you will have to shut down your system in order for the
  59.       MGA driver to take effect.
  60.  
  61. If you are installing this driver for the first time, OS/2 will restart in
  62. Matrox default MGA resolution (640 x 480 x 16M).  You may wish to select your
  63. monitor and/or a different resolution before shutting down.  To do this, use
  64. the MGA Settings notebook, as explained in the next section.
  65.  
  66. Note:  If you are using Selective Install in OS/2 Warp, the MGA
  67. Millennium/Mystique driver shows up as "Other."
  68.  
  69.  
  70. Driver Configuration
  71. --------------------
  72.  
  73. To change the driver monitor configuration or mode (resolution or pixel depth),
  74. use the following procedure:
  75.  
  76.    1. Double-click on the MGA Settings icon on the desktop.
  77.  
  78.    2. Select the Monitor tab and either select Display Data Channel (if
  79.       available) or choose your monitor from the list provided.
  80.  
  81.    3. Select the Resolution tab and choose the resolution/pixel depth.
  82.  
  83. You will need to reboot the system to see the change take effect.
  84.  
  85.  
  86. CID Installation
  87. ----------------
  88.  
  89. Please refer to the README.CID file on the driver disk for information
  90. concerning CID installation.
  91.  
  92.  
  93.  
  94. Uninstalling the Driver
  95. -----------------------
  96.  
  97. The Matrox UNINSTAL command file makes use of the OS/2 DSPINSTL.EXE program
  98. to switch the display driver from MGA mode back to VGA mode, as shown in the
  99. following procedure:
  100.  
  101.    1. Open an OS/2 Text Window (or Full Screen) session.
  102.  
  103.    2. Enter:  CD \MGA\OS2
  104.  
  105.       UNINSTAL
  106.       or
  107.       UNINSTAL CLEAN (to also delete the Matrox files from your hard disk)
  108.  
  109.    3. Once the MGA driver has been uninstalled, the DSPINSTL utility will
  110.       launch.  Select Primary Display, then choose the driver you require (for
  111.       example, VGA).
  112.  
  113. You will need to reboot the system to see the change take effect.
  114.  
  115. Note:  With Warp, there are two additional ways to switch the driver from MGA
  116. mode to VGA mode:
  117.  
  118.   1. You can access a menu by pressing Alt+F1 when the OS/2 logo appears
  119.      in the upper left corner of the screen during the bootup process.
  120.      This menu will allow you to change the driver to VGA by selecting
  121.      the appropriate option.
  122.  
  123.   2. You can also change the driver to VGA by running the following program
  124.      in an OS/2 window or full screen session:
  125.  
  126.               SETVGA
  127.  
  128. Monitor Customization using Matrox's MGA Settings Notebook
  129. ----------------------------------------------------------
  130.  
  131. The OS/2 Millennium/Mystique driver supports VESA DDC-2B compliant monitors.
  132.  
  133. If your monitor is not detected as DDC compliant, the driver will take the
  134. "Unknown Monitor" hardcoded timings, which assume that you have a monitor
  135. supporting all resolutions available on your board at a 60Hz refresh rate
  136. (non-interlaced).
  137.  
  138. If you have a monitor that is capable of refresh rates higher than 60Hz, you
  139. can perform monitor file customization with the help of the MGA settings
  140. notebook.  This program creates a file called MGA.INF, which contains the
  141. appropriate video parameters for your monitor.  The MGA.INF file is read by the
  142. MGA display driver when OS/2 boots.
  143.  
  144. The MGA settings notebook is located in the System Setup folder, described
  145. below.
  146.  
  147. You must shut down OS/2 and reboot your computer for the changes to take
  148. effect.
  149.  
  150. Note:  The timing information in MGA.INF overrides the timing info returned by
  151. DDC compliant monitors.  If you are using a DDC compliant monitor, and you do
  152. not wish to override the monitor's timing info, then check the "Use Data
  153. Display Channel (DDC)" box.
  154.  
  155.  
  156. Monitor Customization using the SYSTEM icon
  157. -------------------------------------------
  158.  
  159. Beginning with V1.20, it is possible to select the monitor refresh rate from
  160. the OS/2 System icon.  This capability is not enabled by default.  To enable
  161. this feature, use the /OS2REFRESH option when running INSTALL.  (In Driver
  162. Installation Step 5 described above, type INSTALL /OS2REFRESH)
  163.  
  164. After installing the drivers using the /OS2REFRESH option, configure the
  165. monitor refresh rate as follows:
  166.  
  167.    1. Right-click on the PM desktop background.
  168.  
  169.    2. Select SYSTEM SETUP to open the system setup folder.
  170.  
  171.    3. Double-click on the SYSTEM icon.
  172.  
  173.    4. Select the SCREEN tab and go to Page 2 of Screen Settings.
  174.  
  175.    5. On Page 2, select a monitor from the "Display name" list box.
  176.  
  177.    6. Return to Page 1 of Screen Settings, and select a resolution
  178.       and pixel depth.
  179.  
  180.    7. In the "Screen refresh rate" list box, select the desired
  181.       monitor refresh rate rate.
  182.  
  183. After rebooting, the new refresh rate will be used.
  184.  
  185. Notes:
  186.    - If you enable this feature and you have a DDC monitor, then
  187.      the refresh rate you selected in the SYSTEM icon will be used
  188.      instead of your monitor's DDC refresh rates.
  189.  
  190.    - If you wish to disable this feature, you may do so by deleting
  191.      the SVGADATA.PMI and VIDEO.CFG files from the \OS2 subdirectory.
  192.      If these files also exist in the root directory, then you must
  193.      delete these files as well.
  194.  
  195.  
  196. Driver configuration using the MGA settings notebook
  197. ----------------------------------------------------
  198.  
  199. Advanced configuration of the MGA driver can be performed through the MGA
  200. settings notebook, located in the System Setup folder and shadowed on the
  201. desktop.
  202.  
  203. Fonts page:
  204.  
  205.    You may change font settings for the current resolution, and they will be
  206.    remembered if you switch resolutions.  You may change font resolution and
  207.    system font size using the Fonts page.  To change the default AVIO font,
  208.    open an OS/2 or DOS Window, select Font Size from the system menu, select
  209.    the desired font, and click the Save button.  Your selection will be stored
  210.    when you exit the MGA settings notebook.
  211.  
  212.    Font resolution affects your desktop icon font.  The system font is used
  213.    for window titles and menus and also affects window sizes.
  214.  
  215.  
  216.    Note that the default values for the fonts are:
  217.  
  218.                 System Font  Font res  AVIO Font
  219.     640x480     Small         96        8x14
  220.     800x600     Small         96        8x14
  221.    1024x768     Medium       120       12x22
  222.    1152x864     Large        120       12x22
  223.    1280x1024    Large        120       12x22
  224.    1600x1200    Large        120       12x22    (Millennium only)
  225.    1600x1280    Large        120       12x22    (Millennium PowerDoc only)
  226.    1800x1440    Large        120       12x22    (Millennium PowerDoc only)
  227.  
  228.  
  229. Advanced page:
  230.  
  231. 1. Grayscale driver switch
  232.  
  233.    Owners of the Millennium PowerDoc Edition may enable the grayscale driver
  234.    switch, which defines whether 8 bits per pixel should be in 256 colors or
  235.    256 gray shades.
  236.  
  237. 2. DIVE switch
  238.  
  239.    Due to an OS/2 problem in 32 bpp, the Warp Digital Video player image
  240.    may be shifted to the left.  24 bpp may trap under certain conditions.
  241.  
  242.    The MGA settings notebook has a switch to ensure DIVE is always enabled in
  243.    24 and 32bpp.  Note that when the box is not checked, DIVE will still be
  244.    used in some cases where no problems were found to occur with OS/2 FixPak
  245.    17 installed.
  246.  
  247. 3. EnDIVE switch
  248.  
  249.    If you wish to enable/disable EnDIVE support, use the EnDIVE switch.
  250.  
  251.  
  252. For all changes you make with the MGA setttings notebook, except for hot key
  253. changes, you must reboot your computer to see the changes take effect.
  254.  
  255.  
  256. Driver configuration using MGACONF.CMD
  257. --------------------------------------
  258.  
  259. 1. Cursor Vsync
  260.  
  261.    The cursor may exhibit some "noise" when an application changes the color
  262.    palette.  This switch forces to wait for a Vsync before changing the
  263.    palette.  The drawback is a loss of speed when changing the palette.  Some
  264.    animated application requires fast changing palette.  This switch applies
  265.    only to 8 bpp.  The problem occurs only on the Millennium card, not the
  266.    Mystique card.
  267.  
  268.    mgaconf v 0      (off)
  269.    mgaconf v 1      (on)
  270.  
  271.    Default is 1.
  272.  
  273. 2. Color cursor
  274.  
  275.    mgaconf c [0/1/2],
  276.  
  277.    where 0 will disable the software cursor (you will have 2 or less colors
  278.            in the cursor)
  279.          1 will enable the software cursor (multicolor cursor)
  280.          2 will enable the software cursor if the cursor has 4 or more colors
  281.  
  282.    Default is 1.
  283.  
  284.  
  285. File description
  286. ----------------
  287.  
  288. Assume: <S> -> Source path
  289.         <D> -> Destination drive (OS/2 system drive).
  290.         <W> -> WinOS/2 or Windows path (\os2\mdos\winos2 or \windows)
  291.  
  292. <S>\INSTALL.CMD     --> stay where it is.
  293. <S>\FIXAUTO.CMD     --> <D>:\MGA\OS2
  294. <S>\UNINSTAL.CMD    --> <D>:\MGA\OS2
  295. <S>\MGAX64.OS2      --> <D>:\MGA\OS2\SYSLEVEL.MGA
  296.    (pack file)          <D>:\MGA\OS2\MGAX64S.DSP
  297.                         <D>:\OS2\DLL\PMGAX64.DLL
  298.                         <D>:\OS2\DLL\BMGAX64.DLL
  299.                         <D>:\MGA\OS2\KMGAX64.SYS
  300.                         <D>:\OS2\MDOS\VMGAX64.SYS
  301.                         <D>:\MGA\OS2\MGASET.EXE
  302.                         <D>:\MGA\OS2\MGASET.HLP
  303.                         <D>:\MGA\OS2\MGAHK.EXE
  304.                         <D>:\MGA\OS2\MGA.MON
  305.                         <D>:\MGA\OS2\MGACONF.CMD
  306.                         <D>:\MGA\OS2\MGAOBJ.CMD
  307. <S>\MGAX64W.OS2     --> <W>:\SMGAX64.DRV
  308.    (pack file)          <W>:\MGAX64.DLL
  309. <S>\MGAX64.DSP      --> stay where it is.
  310. <S>\VVGA.SYS        --> <D>:\MGA\OS2 and <D>:\OS2\MDOS
  311. <S>\MGAX64.DSC      --> <D>:\OS2\INSTALL
  312. <S>\MATROX.PMI      --> <D>:\OS2\SVGADATA.PMI (only if /OS2REFRESH feature is
  313.                                                enabled)
  314. <S>\VIDEO.CFG       --> <D>:\OS2   (only if /OS2REFRESH feature is enabled)
  315. <S>\README.OS2      --> <D>:\MGA\OS2
  316.  
  317. MGAX64.DSP      installation support file for "dspinst" (for first install)
  318. MGAX64S.DSP     installation support file for "dspinst" (for re-install)
  319. MGAX64.DSC      installation support file
  320. SVGADATA.PMI    describes refresh-rate capabilites for /OS2REFRESH feature
  321. VIDEO.CFG       specifies default frequencies for /OS2REFRESH feature
  322. MGAX64.DLL      initialization library for Win-OS/2 fullscreen
  323. BMGAX64.DLL     Base Video Handle (sets VGA for OS/2 fullscreen)
  324. PMGAX64.DLL     32bit PM driver (8, 16 and 32bpp)
  325. KMGAX64.SYS     low-level initialization for 32bit PM driver
  326. SMGAX64.DRV     Win-OS/2 Fullscreen and Seamless driver
  327. VMGAX64.SYS     Virtual MGA Millennium/Mystique driver (for DOS sessions)
  328. VVGA.SYS        Modified IBM VGA virtual driver.
  329. README.OS2      Readme file
  330. INSTALL.CMD     first time installation
  331. MGASET.EXE      MGA Settings notebook
  332. MGASET.HLP      MGA Settings notebook help
  333. MGAHK.EXE       hot key trapping applet
  334. MGACONF.CMD     Configuration utility for PM driver
  335. FIXAUTO.CMD     inserts "SET MGA=x:\MGA\OS2" in autoexec.bat (Win-OS/2)
  336. UNINSTAL.CMD    uninstalls driver (and removes all Millennium/Mystique files
  337.                 from hard drive)
  338. MGA.MON         MGA Monitor data file for MGA settings notebook
  339. SETUP.EXE       Monitor program to create MGA.INF out of MGA.MON
  340. SYSLEVEL.MGA    driver Version info
  341.                 (use OS/2 command syslevel.exe to obtain the driver Version)
  342. MGAOBJ.CMD      MGA object installation
  343.  
  344.  
  345. KNOWN BUGS AND LIMITATIONS
  346. --------------------------
  347.  
  348. The following bugs and limitations are present in this release of the
  349. driver:
  350.  
  351. · When using the DSPINSTL program to reconfigure your MGA driver, the program
  352.   states that VGA is the current driver.  This is because the DSPINSTL program
  353.   included with OS/2 does not correctly identify the MGA Millennium or
  354.   Mystique.
  355.  
  356. · The MGA PowerDesk Windows drivers should NOT be used in a Win-OS/2 full
  357.   screen session.  The results will be highly unpredictable.  If the MGA
  358.   windows driver features are absolutely needed, then a dual-boot configuration
  359.   must be used.  When booting from DOS, the PowerDesk Windows driver features
  360.   are fully supported.
  361.  
  362. · The driver does not work with Mayo Clinic Family Health Book (Windows app.)
  363.   in seamless Windows at 16bpp (64K colors).  If you need to run this
  364.   application, please run it in Win-OS/2 fullscreen instead or change the
  365.   colors to 256 or 16M.
  366.  
  367. · When switching quickly from PM desktop to full-screen Win-OS/2, the Win-OS/2
  368.   desktop may get corrupted.  To restore the Win-OS/2 desktop, do a slow switch
  369.   to PM Desktop and back to Win-OS/2.
  370.  
  371. · The mouse pointer may jump while panning.
  372.  
  373. · The MGA settings notebook may cause a system error if running when the system
  374.   is shut down.  Close the notebook before shutting down.
  375.  
  376. · It is necessary to shut down all Win-OS/2 sessions prior to installing the
  377.   driver.  Make sure the "Fast load" option in Win-OS/2 Setup (in the System
  378.   Setup folder) is not checked, and close Win-OS/2 Setup prior to install.
  379.   Otherwise, required Win-OS/2 files will not be copied, and install will fail.
  380.  
  381. · Using the large OS/2 system font on OS/2 2.11 causes some text in the MGA
  382.   settings notebook to be cut off.  This is due to an OS/2 bug in the font
  383.   spacing.
  384.